Dakota 2WD L4-2.5L VIN P (2001)
18. Position thrust plate on front annulus gear support (Fig. 219). Note that plate has two tabs on it. These tabs fit in notches of annulus hub.
19. Install thrust washer in front annulus (Fig. 220). Align flat on washer with flat on planetary hub. Also be sure washer tab is facing up.
20. Install front annulus snap-ring (Fig. 221). Use snap-ring pliers to avoid distorting ring during installation. Also be sure ring is fully seated.
21. Install planetary selective snap-ring with snap-ring pliers (Fig. 222). Be sure ring is fully seated.
