Dakota 2WD V6-239 3.9L Magnum (1996)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Front Antilock Valve Replacement
1. Disconnect battery ground cable.
2. Disconnect brake lines and electrical connections at anti-lock valve.
3. Remove anti-lock valve to stud plate screws, then lift anti-lock valve upward off studs and off bracket assembly.
4. Reverse procedure to install, noting the following:
a. Torque valve attaching screws to 8-10 ft. lbs.
b. Torque valve attaching nuts to 14-18 ft. lbs.
c. Torque brake line fittings to 12-17 ft. lbs.
d. Bleed brake system as described under Antilock Brake System/Service and Repair.