Dakota 2WD V8-4.7L Flex Fuel (2009)
Rear Door Hinge: Service and Repair
Rear Door Hinge - Installation
Rear Door Hinge
INSTALLATION
NOTE: When adjusting a door with the door to hinge fasteners, it will be necessary to replace the shouldered door studs (1) with service studs
without the shoulder in order to achieve correct door position adjustments.
1. If required, install the service studs (1) and tighten to 12 Nm (105 in. lbs.).
NOTE: A suitable body sealant should be used when removing or moving the hinges.
2. If necessary, paint replacement door hinge before installation.
3. Position door hinge (1 or 4) on the b-pillar using the marks made during removal and install the bolts (3).
4. Tighten the bolts (3) to 28 Nm (21 ft. lbs.).
5. Install the inner bolt (2) and tighten to 28 Nm (21 ft. lbs.).
