Dakota 4WD V6-3.7L (2008)
12. Remove the four screws (1) that secure the air inlet housing (2) to the top of the HVAC housing (3) and remove the air inlet housing.
NOTE: If the foam seal on the air inlet housing is deformed or damaged, it must be replaced.
13. If required, disassemble the air inlet housing See: Disassembly.
NOTE: If the foam seal on the panel/defrost outlet is deformed or damaged, it must be replaced.
14. Remove the foam seal (1) from the panel/defrost outlet (2) located on the top of the HVAC housing (3).
15. Remove the six screws (1) that secure the panel/defrost outlet (2) to the top of the HVAC housing (3) and remove the outlet.