Dakota 4WD V8-4.7L VIN J (2007)
Wheel Fastener: Service and Repair
Removal
REMOVAL
FRONT WHEEL STUDS
1. Raise and support the vehicle.
2. Remove the wheel and tire assembly.
3. Remove the brake caliper, caliper adapter and rotor.
4. Remove the wheel speed sensor from the hub.
5. Press the stud (2) from the hub using special tool C-4150A (1).
REAR WHEEL STUDS
1. Remove the wheel and tire assembly.
2. Remove the brake drum.
3. Press the stud (2) from the hub using special tool C-4150A (1).