Dakota 4WD V8-4.7L VIN P Flex Fuel (2007)
8. Install the brake line (1) at the wheel cylinder (2).
9. Lower the vehicle and remove the support.
10. Remove the prop rod from the brake pedal.
11. Bleed the area of repair for the brake system, If a proper pedal is not felt during bleeding an area of repair then a base bleed system must be
performed.
Rear Brake Hose - Axle To Frame
REAR BRAKE HOSE - AXLE TO FRAME
1. Install the brake hose (3) to the bracket and then install the clip (1).
2. Tighten the brake line (2) into the brake hose. Tighten to 16 Nm (21 ft.lbs.).
