Dakota 4WD V8-4.7L VIN P Flex Fuel (2007)
Installation
INSTALLATION
1. Before proceeding with the following repair procedure, review all warnings and cautions.
2. Install the sensor (2) and install the screw.
3. Connect the electrical connector (1).
4. Position the defroster grille (1) into place and seat the retaining clips (2) fully.
5. Position the a-pillar trim panel tabs (3) into place and seat both a-pillar panels (1) fully.
6. Install the bolts (2) and tighten to 6 Nm (55 in. lbs.).
