dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

ABOUT US
Controller Antilock Brake <--> [Electronic Brake Control Module]|EBC 325|Page 59 > < Controller Antilock Brake <--> [Electronic Brake Control Module]|EBC 325|Page 57

Durango 2WD V8-4.7L VIN N (2001)

Page 1
background image

Controller Antilock Brake: Service and Repair

REMOVAL

NOTE:  If the CAB needs to be replaced, the rear axle type and tire revolutions per mile must be programed into the new CAB. For axle type refer to
Differential and Driveline.

Fig. 5 Harness Connector Locks

1. Push the CAB harness connector lock to release the lock and remove the connector from the controller.

Fig. 6 Pump Motor Connector

2. Remove the RWAL valve harness and the pump motor connectors from the controller.

Controller Antilock Brake <--> [Electronic Brake Control Module]|EBC 325|Page 59 > < Controller Antilock Brake <--> [Electronic Brake Control Module]|EBC 325|Page 57