Durango 2WD V8-5.7L Hybrid (2009)
10. Remove pushpins (1) and the upper condenser/radiator seal (2).
11. Remove the upper radiator support bracket bolts (2) and the upper radiator support bracket (3).
12. Remove the upper radiator hose.
13. Remove the EGR tube at the throttle body.
14. Remove the throttle body assembly.See: Powertrain Management/Fuel Delivery and Air Induction/Throttle Body/Service and Repair/Throttle
Body - Removal
15. Disconnect the A/C compressor high voltage cables at the TIPM module. See: Hybrid Drive Systems/Battery System, Hybrid Drive/Hybrid
Battery Bus / Cable/Service and Repair/High Voltage Battery Cable - Removal
16. Disconnect the electrical connector from the ECT sensor (1).