Durango 2WD V8-5.7L Hybrid (2009)
7. Install the primary oil filter (2), the auxiliary oil filter (3) and the transmission oil pan (1),
8. Install the transmission oil pan bolts. Tighten the oil pan bolts to 27 Nm (20 ft. lbs.).
9. Install a new gasket to the transmission auxiliary oil pump (2).
10. 10. Install the transmission auxiliary oil pump and four bolts. Tighten bolts to 11 Nm (8 ft. lb).
11. Install the bolt (1) attaching the transmission auxiliary oil pump harness (2) to the transmission bellhousing (3). Tighten the bolt to 11 Nm (8 ft.
lbs)
12. Connect the transmission auxiliary oil pump electrical connector.
13. Lower the vehicle.
14. Check and fill the transmission with DEXRON(R) VI ATF as necessary. . See: Service and Repair/Procedures/Transmission Fill
