Durango 4WD V8-4.7L VIN N (2001)
Check Valve: Service and Repair
Front Check Valve Replacement
REMOVAL
1. Remove the front wiper arms from the wiper pivots. (Refer to FRONT WIPER ARMS - REMOVAL).
2. Open the hood and pull the hood to plenum seal off of the forward flanges of the cowl grille cover and the plenum panel.
3. Remove the cowl plenum cover/grille panel from the top of the cowl plenum.
4. From the underside of the cowl plenum coven grille panel, disconnect the washer hoses from the three barbed nipples of the eye fitting/check valve
unit.
5. Remove the eye fitting/check valve unit from the underside of the cowl plenum cover/grille panel.
INSTALLATION
1. Position the eye fitting/check valve unit to the underside of the cowl plenum cover/grille panel.
2. From the underside of the cowl plenum cover/grille panel, reconnect the three washer hoses to the barbed nipples of the eye fitting/check valve
unit.
3. Reinstall the washer hoses for the front washer nozzles into their locating clips on the underside of the cowl plenum cover/grille panel.
4. Reinstall the cowl plenum cover/grille panel onto the top of the cowl plenum panel.
5. Reinstall the front wiper arms onto the wiper pivots. (Refer to FRONT WIPER ARMS - INSTALLATION).