Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
6. Install the screws (4) that secure the two halves of the HVAC housing (3) together. Tighten the screws to 2.2 Nm (20 in lbs.).
7. Install the HVAC wiring harness (1). Make sure the harness is routed through all wiring retainers.
8. If removed, install the blower motor resistor or power module (2), depending on application.
9. Connect the HVAC wire harness to the blower motor resistor or power module, depending on application.
10. Install the blower motor (2) to the HVAC housing (3).
11. Connect the HVAC wire harness (1) to the blower motor.
12. Carefully install the heater core (6) into the top of the HVAC housing (3). Make sure that the heater core insulator is properly positioned.
