Durango 4WD V8-4.7L VIN P Flex Fuel (2007)
4. Remove the bolt (1) that secures the front section of the A/C liquid line (2) to the receiver/drier (3).
5. Disconnect the front section of the A/C liquid line from the receiver/drier and remove and discard the O-ring seal.
6. Install plugs in, or tape over the opened liquid line fitting and receiver/drier port.
7. Remove the nut (1) that secures the front section of the A/C liquid line (2) to the A/C condenser (3).
8. Disconnect the A/C liquid line from the A/C condenser and remove and discard the O-ring seal and gasket.
9. Install plugs in, or tape over the opened liquid line fitting and condenser port.
10. Remove the front section of the A/C liquid line from the engine compartment.
REAR SECTION