dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Security Lamp/Indicator|Description|Page 9292 > < Standard Procedure - Horn Chirp Preference|Page 9287
Page 1
background image

Security Lamp/Indicator: Description and Operation
Description

DESCRIPTION

A security indicator is standard equipment on all instrument clusters. However, on vehicles not equipped with the optional Vehicle Theft Security System
(VTSS), this indicator is electronically disabled. On Dodge vehicles, this indicator is located near the bottom of the speedometer dial face of the cluster
overlay, near the center. On Chrysler vehicles, this indicator is located near the top of the cluster overlay, between the speedometer and the tachometer.

The security indicator consists of a small round cutout in the opaque layer of the instrument cluster overlay. The dark outer layer of the overlay prevents
the indicator from being clearly visible when it is not illuminated. A red Light Emitting Diode (LED) behind the cutout in the opaque layer of the overlay
causes the indicator to appear in red through the translucent outer layer of the overlay when it is illuminated from behind by the LED, which is soldered
onto the instrument cluster electronic circuit board.

The security indicator is serviced as a unit with the instrument cluster.

Security Lamp/Indicator|Description|Page 9292 > < Standard Procedure - Horn Chirp Preference|Page 9287