dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Power Trunk / Liftgate Control Module|Removal|Page 11475 > < Power Trunk / Liftgate Control Module|Removal
Page 2
background image

6. Remove the left quarter trim panel (5).

a. Remove the third row lower seat belt webbing anchor (4).
b. Remove the third row upper turning loop anchor bolt.
c. Remove the six quarter trim retaining screws.
d. Pull trim from inner quarter panel (1).
e. Disconnect the auxiliary power outlet and power inverter (2) wire harness connectors (3) (if equipped).
f.

Remove the left quarter trim panel (5).

7. If equipped, remove the subwoofer,See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Speaker/Service and

Repair/Speaker - Removal.

8. Disconnect the wire harness connectors (4) from the power liftgate control module (2).
9. Remove the power liftgate control module retainer (3).

10. Tilt the rear of the module (2) away from the quarter panel and disengage the mounting tab from the locating slot (1).
11. Remove the power liftgate control module (2) from the vehicle.

Power Trunk / Liftgate Control Module|Removal|Page 11475 > < Power Trunk / Liftgate Control Module|Removal