dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Oil Pressure Sender > < Procedures|Page 2701
Page 2
background image

2. Position a new pan gasket (1)on oil pan.
3. Install oil pan (3) and tighten fasteners to 12 Nm (105 in. lbs.).
4. Install cover to transaxle case.
5. Install the drive belt splash shield.
6. Lower vehicle and install oil dipstick.
7. Connect negative cable to battery.
8. Fill crankcase with oil to proper level.

Oil Pressure Sender > < Procedures|Page 2701