dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Blower Motor Relay > < Removal - Front|Page 8151
Page 1
background image

Blower Motor: Service and Repair
Installation - Rear

INSTALLATION

1. Position the rear blower motor (2) into the rear heater-A/C housing (1).
2. Install the three screws (3) that secure the rear blower motor to the rear heater-A/C housing. Tighten the screws to 2 Nm (17 in. lbs.).
3. Connect the rear heater-A/C wire harness connector (4) to the rear blower motor.
4. Install the rear heater-A/C housing.

Blower Motor Relay > < Removal - Front|Page 8151