Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Rear Bumper Cover / Fascia: Service and Repair
Removal
REMOVAL
1. Open liftgate.
2. Remove attaching screw from upper fascia to the liftgate tower, right side and left side.
3. Hoist and support vehicle with safety stands.
4. Disconnect rear park assist wire connector (Figure 1), if equipped.
Figure 1 PARK ASSIST WIRE CONNECTOR
5. Remove the three screws attaching rear fascia to rear fascia brackets on right side and left side (Figure 2) and (Figure 3).
6. Remove the four plastic push pin attaching bottom of rear fascia to fascia support.
7. Remove rear fascia from vehicle by lifting sides of fascia up and outboard to release from rear fascia brackets.
Figure 2 REAR BUMPER FASCIA
