Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Hood Latch Release Cable: Service and Repair
Installation
INSTALLATION
1. Place hood release cable in position under instrument panel.
2. Attach latch end of hood release cable to mechanic's wire protruding through dash panel.
3. Route cable forward through engine compartment toward latch by pulling on mechanic's wire (Figure 1) .
4. Disconnect mechanic's wire from cable.
5. Engage rubber grommet cable insulator into hole in dash panel .
6. Install hood release handle into instrument panel.
7. Place cable in position on latch.
8. Slide cable case end sideways into keyhole slot of hood latch.
9. Engage cable end into hood latch locking mechanism.
10. Install hood latch.
11. Install attaching clips to cable case and install clips into original holes in strut tower, fender, headlamp area, and radiator closure panel
crossmember.
Figure 1 HOOD RELEASE CABLE ROUTING
