Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Drink Holders: Service and Repair
Installation
INSTALLATION
1. Ensure the cup holder assembly is in the closed position. The cup holder assembly must be installed as an assembly to ensure proper track
position.
2. Place the cup holder assembly into position in the lower instrument panel and slide into opening until the rear guide struts snap into place (Figure
1).
3. Install the center bezel.
4. Install the center bezel attaching screws
5. Install the screw access cover to the bottom of the center bezel.
Figure 1 TRAY CUP HOLDER
