Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Figure 1 TIMING CHAIN COVER AND GASKET
3. Rotate crankshaft so that the oil pump drive flats are in the vertical position.
4. Position oil pump inner rotor so the mating flats are in the same position as the crankshaft drive flats (Figure 1).
CAUTION: Make sure the oil pump is engaged on the crankshaft correctly or severe damage may result.
5. Install timing cover (Figure 1).
6. Install timing chain cover bolts. Tighten M8 bolts to 27 Nm (20 ft. lbs.) and M10 bolts to 54 Nm (40 ft. lbs.) (Figure 2).
Figure 2 TIMING CHAIN COVER BOLT LOCATIONS
