Grand Caravan V6-3.3L VIN E Flex Fuel (2007)
Installation
INSTALLATION
The power transfer unit input shaft cover seal is the larger of the two seals located on the inside of the end cover. The differential bearing cup must be
removed to service this seal.
1. Clean and inspect seal area.
2. Use special tool No. MD998803 and install seal (Figure 1). When installing seal the spring side of the seal must face toward the special tool.
Figure 1 Seal Installation
3. Reinstall the original bearing race and shim using special tool No. 6522 (Figure 2) and (Figure 3).
