Grand Caravan V6-3.3L VIN R (2005)
Parking Brake Lever: Service and Repair
LEVER - PARKING BRAKE
REMOVAL
1. Manually release the automatic self-adjusting mechanism tension of the parking brake lever (pedal) assembly.
2. Disconnect negative (ground) cable from the battery and isolate cable from battery terminal.
3. Remove sill scuff plate from left door sill.
4. Remove the left side kick panel.
5. Remove the steering column cover from the lower instrument panel.
6. Remove the reinforcement from the lower instrument panel.
7. Remove the three bolts mounting the wiring junction block to the instrument panel.
NOTE: When removing the lower mounting bolt, push the park brake pedal down 5 clicks to access the lower mounting bolt.
8. Remove the lower bolt mounting the parking brake lever (pedal) to the body (Fig. 124).
9. Remove the forward nut mounting the parking brake lever to the body (Fig. 124).
10. Remove the upper bolt mounting the parking brake lever to the body (Fig. 124).
11. Pull downward on front parking brake cable while rotating lever assembly out from behind junction block.
12. Remove the release link from the parking brake lever assembly.
13. Disconnect the wiring connector from the indicator lamp ground switch (Fig. 124) (Fig. 125).
14. Remove front parking brake cable strand button from the lever mechanism reel (Fig. 125).
