dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Center Bezel Outlets|Page 7224 > < Center Bezel Outlets|Page 7222
Page 4
background image

INSTALLATION

1. Install the right and/or left floor distribution duct onto the center floor distribution duct as required.
2. Position the center floor distribution duct under the instrument panel center stack and engage it to the floor outlet of the front HVAC housing.
3. Align the locator hole on the center floor distribution duct with the weld stud on the front floor panel and install the distribution duct onto the weld

stud.

4. Install the carpet onto the front floor panel and under the instrument panel.

Rear Floor Heat Duct

REMOVAL

1. Remove the trim panel from the right inner quarter panel.

Rear Floor Heat Duct

2. Remove the two screws that secure the rear floor heat duct to the right inner quarter panel.
3. Slide the rear floor heat duct forward to disengage it from the rear HVAC housing and remove the duct.

INSTALLATION

1. Position the rear floor heat duct to rear HVAC housing.
2. Slide the rear floor heat duct rearward to engage it to the rear HVAC housing.
3. Install the two screws that secure the rear floor heat duct to the right inner quarter panel. Tighten the screws to 2 N.m (17 in. lbs.).
4. Install the trim panel onto the right inner quarter panel.

Demister Outlets

REMOVAL

Center Bezel Outlets|Page 7224 > < Center Bezel Outlets|Page 7222