Grand Caravan V6-3.3L VIN R (2005)
7.
Slide the spring clamps off of the heater core quick-connect fittings located on the rear heater core tubes (Figure 3).
8.
Carefully remove both old heater hoses from the heater tubes.
CAUTION:
Residual coolant will come out of the hoses and tubes when the heater hoses are removed. Use an appropriate container to catch the coolant.
9.
Remove and save the spring clamps on the old hoses. Then discard the old hoses.
10.
Install two spring clamps onto each heater tube.
11.
Using the short hoses supplied in the kit, install the new heater hoses onto the heater hose tubes and the heater core tube quick connects.
12.
Place the spring clamps at each end of the new heater hose.
NOTE:
The wings of the spring clamps should be pointed downward.
13.
Remove the spare tire heat shields to gain access to the front set of heater hoses.
14.
Using a cut off wheel, grind a slot into the heater tube aluminum crimp band on the two heater hoses (Figure 4).
CAUTION:
