dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Front Impact Sensor|Page 7886 > < Front Impact Sensor
Page 1
background image

Impact Sensor: Service and Repair
Side Impact Sensors

B-Pillar Mounted

REMOVAL

The right and left front row side impact sensors, are mounted identically, on opposite sides of the vehicle, in the b-pillar.

1. Open hood, disconnect and isolate the battery negative cable.

WARNING:  WAIT TWO MINUTES FOR THE SYSTEM RESERVE CAPACITOR TO DISCHARGE BEFORE BEGINNING ANY
AIRBAG COMPONENT SERVICE. PERSONAL INJURY OR DEATH MAY RESULT.

2. Remove the B-pillar lower trim for the side of the vehicle that you are replacing the side impact sensor.

Front Row Side Impact Sensor And Bracket

3. Disconnect the electrical connector from the impact sensor.
4. Remove the four retaining screws to the impact sensor bracket.

Front Impact Sensor|Page 7886 > < Front Impact Sensor