Grand Caravan V6-3.3L VIN R (2005)
9.
Pull the wheelhouse shield back from the front fascia and remove the right and left horizontal nuts holding the front fascia to the front lip of the
fender (Fig. 3)
10.
Remove 2 vertical screws holding the front fascia to the front fender.
11.
Carefully remove the front fascia and set aside.
CAUTION:
Care should be used not to damage painted surfaces.
12.
Break the front air bag sensor using a suitable tool. Remove broken sensor pieces.
13. Using a powered cut-off wheel, remove the head of the sensor mounting bolt.
14.
Remove sensor bushing from bolt.
15.
Using a powered cut-off wheel, cut the bolt and lip of the riv-nut flush with sheet metal.
16.
Using a hammer, carefully drive the bolt and the riv-nut into the lower radiator crossmember.
CAUTION:
Do not distort the structural sheet metal surface where the riv-nut is attached.
17.
Remove the old riv-nut through the access hole in the crossmember using a magnetic tool.
