Grand Caravan V6-3.3L VIN R (2005)
g. Pull the wheelhouse shield back from the front fascia and remove the right and left nuts holding the front fascia to the front lip of the fender
(Figure 3).
h. Carefully remove the front fascia and set it aside.
CAUTION:
Be careful not to scratch the painted surfaces of the front fascia and front fenders.
i.
Break the supplemental front airbag sensor apart using a suitable tool. Remove broken airbag sensor pieces from the vehicle and discard.
j.
Using a cut-off wheel, remove the head of the airbag sensor mounting bolt.
k. Remove and discard the supplemental front airbag sensor bushing.
l.
Using a hammer, carefully drive the bolt and the riv-nut into the lower radiator crossmember.
CAUTION:
Do not distort the structural sheet metal surface where the riv-nut is attached.
m. Remove the old riv-nut through the access hole of the lower radiator crossmember using a magnetic tool.
NOTE:
Be sure to completely remove the riv-nut from the lower radiator crossmember.
