Grand Caravan V6-3.3L VIN R (2005)
n. Pre-assemble the new riv-nut by installing the installation nut and the riv-nut onto the installation bolt as shown in Figure 4.
o. Insert the new riv-nut-bolt/nut assembly into the original riv-nut hole in the lower radiator crossmember.
p. Using a 10mm crows foot, tighten the installation nut to 80 in. lbs. (9 N.m) while holding the head of the installation bolt stationary (Figure 5).
q. Loosen the installation nut and remove the installation bolt and nut from the riv-nut.
r.
Repeat Steps 7i through 7q for each airbag sensor mounting riv-nut that has broken loose (spins freely).
8. For vehicles that had the front fascia removed, use the following procedure to install the front fascia:
a. Position the front fascia onto the vehicle.
