Grand Caravan V6-3.3L VIN R (2005)
6. Remove the right and left supplemental front airbag sensors and discard the sensors and retaining bolts.
CAUTION:
If the retaining bolt spins freely and cannot be removed, the sensor's riv-nut has broken loose from the radiator lower crossmember. Continue with
Step 7 to install a new riv-nut (PN CBX2G093). If there was no problem when removing the sensor retaining bolts, continue with Step 9.
7. Use the following procedure, if required, to replace a spun riv-nut:
a. For vehicles with fog lamps, disconnect the electrical harness connector to the left and right fog lamps.
b. Remove the four screws (two each side) that secure the left and right wheelhouse splash shield to the front fascia.
c. Remove the right and left side fascia-to-fender bolts.
d. Carefully separate the lower air dam plastic push retainers from the lower radiator crossmember.
e. Partially lower the vehicle.
f.
Remove the right and left fascia bolts from the upper radiator crossmember (Figure 2).
