Grand Caravan V6-3.3L VIN R (2005)
11. Remove the three front mounting bolts through the pulley (Fig. 11)
12. Remove the pump (with pulley) through the engine compartment rocking it over the aluminum bracket.
DISASSEMBLY - PUMP (PULLEY)
The only serviceable part of the power steering pump is the pulley. The procedure following is for removal and installation of the pulley from the
pump once the pump is removed from the vehicle.
1. Remove the power steering pump from the vehicle.
2. Remove the pulley from the shaft of the power steering pump using Puller C-4333 (Fig. 14).
CAUTION: Do not hammer on power steering pump pulley. This will damage the pulley and the power steering pump.
3. Replace pulley if it is found to be bent, cracked, or loose.
ASSEMBLY - PUMP (PULLEY)
The only serviceable part of the power steering pump is the pulley. The procedure following is for removal and installation of the pulley from the
pump once the pump is removed from the vehicle.
