Grand Caravan V6-3.3L VIN R (2005)
4. Remove the steering wheel retaining bolt (Fig. 42).
5. Remove damper (Fig. 42).
6. If equipped, disconnect the remote audio control switch wiring from the clockspring (Fig. 42).
CAUTION: Do not bump or hammer on steering column or steering column shaft when removing steering wheel from steering column shaft.
CAUTION: When installing steering wheel puller bolts in steering wheel, do not thread bolt into steering wheel more than a half inch. If the bolts
are threaded into the steering wheel more than a half inch they will contact and damage the clockspring.
7. While holding the steering wheel firmly in the straight-ahead position, remove the steering wheel from steering column shaft using a steering
wheel puller (Fig. 43).
8. Remove the puller from the steering wheel.
9. Remove the remote radio switches if needed.
INSTALLATION
1. If needed, install the remote radio switches.
CAUTION: Do not force steering wheel onto steering column shaft by driving it on. Pull steering wheel down onto shaft using only the steering
wheel retaining nut.
2. Feed and route wiring from clockspring through upper access hole in steering wheel.
3. Align master serrations in steering wheel with omitted spline on steering column shaft (at 12 o'clock position). Slide the steering wheel onto the
steering column shaft by hand (Fig. 42). Use care not to pinch any wiring.
