Grand Caravan V6-3.8L (2009)
14. Remove the sliding door drive tensioner bolt (1) and remove the tensioner from the sliding door lower hinge (2).
15. Remove the hold-open striker retaining bolts (4) and remove the hold open striker (1).
16. Apply masking tape to outside surface of quarter panel below the center roller channel, rearward of the door opening.
17. Apply masking tape to door jamb area, rearward of the upper roller channel.
18. Remove the sliding door upper track bumper (2) by pulling out on the bottom edge of the bumper to disengage the retaining feature (3) from the
slot in the track (4).
