Grand Caravan V6-3.8L (2009)
NOTE: Outboard side of seat shown. Inboard side similar. Illustration shown with seat back and hinges removed for clarity.
6. Remove the four nuts (4) that secure each seat track (2) to the pivot mechanism (3).
7. Remove the seat tracks and eight spacers (1) from the pivot mechanism.
8. Remove the eight spacers (6) from the mounting studs on the seat tracks (1 and 5).
9. Disengage the J-hook retainer (8) that secures the seat cushion cover to the rear of the seat cushion frame (7).
10. Disengage the four J-hook retainers (2 and 4) that secure the seat cushion cover to the sides of the seat cushion frame.
11. Disengage the J-hook retainer (3) that secures the seat cushion cover to the front of the seat cushion frame.
12. Remove the seat cushion and cover from the seat cushion frame.
13. If equipped with heated seats, disconnect the seat cushion wire harness connector located at the rear of the seat frame.
14. Disengage the seat cushion support (1) from the six retaining tabs (9) located on the seat cushion frame (2) by using a small punch or similar tool
as a lever. Place the punch or tool through the six holes in the support and into the corresponding holes in the seat cushion frame, then stretch the
support off the retaining tabs.
