Grand Caravan V6-3.8L (2009)
9. Install the HVAC housing .
Rear HVAC Housing
ASSEMBLY
1. Install the blend-air door (1) and the mode-air door (4) onto the pivots located in the inboard half of the rear heater-A/C housing (3).
2. Install the rear A/C evaporator (2) into the rear heater-A/C housing.
3. Align the pivot shafts of the blend-air door and the mode-air door to the pivot holes located in the outboard half of the rear heater-A/C housing and
install the two halves of the rear housing (3) together. Make sure the three plastic retaining tabs (1) are fully engaged.
4. Install the 15 screws (2) and three metal retaining clips (4) that secure the two halves of the rear heater-A/C housing together. Tighten the screws
to 2 Nm (17 in. lbs.).
