dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Steering - Low Speed Squeaking Noises|Page 5706 > < Shaft Lock Module - Removal|Page 5697
Page 1
background image

Steering Gear: Customer Interest
Steering - Low Speed Squeaking Noises

NUMBER: 19-002-09

GROUP: Steering

DATE: May 08, 2009

SUBJECT:
Steering Squeak at Low Speed Maneuvers and Over Bumps

OVERVIEW:
This bulletin involves removing, modifying and re-installing the power steering gear heat shield.

MODELS:

2009

(RT)

Caravan/Town and Country

NOTE

This bulletin applies to vehicles built before February 9, 2009 (MDH0209XX).

SYMPTOM/CONDITION:
Some sway bars may be rubbing against the heat shield during low speed maneuvers and over bumps.

DIAGNOSIS:
Inspect the heat shield to sway bar clearance, if there is rubbing between the sway bar and the heat shield, perform the repair procedure.

PARTS REQUIRED:

REPAIR PROCEDURE:

1. Raise the vehicle.

2. Remove the power steering gear heat shield. Refer to the detailed removal and installation procedures available in DealerConnect > TechCONNECT

under: Service info > Steering > Gear > Removal > Step 16

3. Remove the two bolts and clips that retain the heat shield to the vehicle.

Steering - Low Speed Squeaking Noises|Page 5706 > < Shaft Lock Module - Removal|Page 5697