dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Door Mounted Speakers|Page 7286 > < Base 6 Speaker System|Page 7283
Page 1
background image

Speaker: Service and Repair
Door Mounted Speakers

CAUTION:  Do not operate the radio with speaker leads detached. Damage to the output devices may result.

REMOVAL - 6.5 Inch Lower Door Mounted Speakers

Negative Battery Cable Remote Terminal

1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
2. Open drivers door.

Door Mounted Speakers

3. Using a trim stick (special tool #C-4755). care-fully pry speaker grille away from door trim panel.
4. Remove two speaker retaining screws.
5. Pull speaker away from door and disconnect wiring.

INSTALLATION
-

For installation, reverse the above procedures.

REMOVAL - 2.5 Inch Lower Front Window Corner Speakers (infinity)
1. Open hood and disconnect the negative battery cable remote terminal from the remote battery post.
2. Open drivers door.
3. Remove two speaker enclosure attachment screws holding the enclosure ring and grill to the door.
4. Remove two speaker retaining screws.
5. Pull speaker away from door and disconnect wiring.

INSTALLATION
-

For installation, reverse the above procedures.

Door Mounted Speakers|Page 7286 > < Base 6 Speaker System|Page 7283