Magnum V6-2.7L VIN T (2007)
4. Install oil pan while aligning the oil level indicator tube and attach fasteners using the following tightening sequence:
a. Install oil pan bolts and nuts finger tight only-just tight enough to compress the gasket's rubber seal. Line up front of oil pan to be flush
with front face of block.
b. Install lower timing chain cover bolts (1) and tighten to 12 Nm (105 in. lbs.).
c. Tighten oil pan bolts to 28 Nm (250 in. lbs.).
d. Tighten oil pan nuts to 12 Nm (105 in. lbs.).
5. Install lower bolt attaching the A/C compressor to oil pan (2). Tighten bolt to 28 Nm (21 ft. lbs.).
6. Install lower bolt attaching the alternator bracket to oil pan (1). Tighten bolt to 28 Nm (21 ft. lbs.).
7. Install oil filter (3) and drain plug (5).
8. Install structural collar.
