Magnum V6-3.5L VIN V (2006)
b. Position new seal (2) with the part number on seal facing cylinder head cover.
c. Install seals using Special Tool MD-99830 (1).
3. Install cylinder head cover bolts and tighten to 12 Nm (105 inch lbs.).
4. Install the ground strap retaining bolt (3) to the cylinder head cover.
5. Install the wire harness track (4).
6. Install the ignition coils (2). Tighten mounting screws to 6.7 Nm (60 inch lbs.).
7. Connect the ignition coil electrical connectors (2).
8. Install upper intake manifold.
9. Connect negative battery cable