dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Battery Cables - Description|Page 7193 > < Battery Cables - Description|Page 7191
Page 3
background image

4. Connect the voltmeter to measure between the battery negative cable terminal clamp and the battery negative cable eyelet terminal connection at

the vehicle body. Rotate and hold the ignition switch in the Start position. Observe the voltmeter. If the reading is above 0.2 volt, clean and tighten
the battery negative cable eyelet terminal connection at the vehicle body. Repeat the test. If the reading is still above 0.2 volt, replace the battery
rear negative cable.

5. Connect the voltmeter to measure between the battery negative cable eyelet terminal connection at the right front strut tower and the battery

negative cable eyelet terminal connection at the transmission housing. Rotate and hold the ignition switch in the Start position. Observe the
voltmeter. If the reading is above 0.2 volt, clean and tighten the battery negative cable eyelet terminal connection at the right front strut tower.
Repeat the test. If the reading is still above 0.2 volt, replace the battery front negative cable.

Battery Cables - Description|Page 7193 > < Battery Cables - Description|Page 7191