Magnum V8-5.7L VIN 2 (2007)
5. Remove the Power Distribution Center (PDC) cover (2).
6. Remove the battery positive cable to rear PDC fastener (3).
7. One at a time, free the battery positive cable from the routing clips located in the rear compartment area.
8. Remove the right, front seat.
9. Remove the right, rear seat cushion. Pull upward at forward edge of each retainer loop of the rear seat cushion to disengage retainer loops from
cups in floor.
10. Remove the right, front and rear door sill trim panels.
11. Remove the right, B - pillar lower trim panel.
12. Position carpet aside to gain access to the battery positive cable.
