dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Battery Retainer - Removal|Page 7212 > < Battery Cables - Removal|Page 7207
Page 1
background image

Battery Tray: Service and Repair
Battery Retainer - Removal

REMOVAL

1. Verify that the ignition switch and all accessories are OFF.

2. Remove the rear compartment floor, trim panel to gain access to the battery.

3. Disconnect and isolate the battery negative cable.

4. Remove the bolt from the battery holddown and remove the holddown.

Battery Retainer - Removal|Page 7212 > < Battery Cables - Removal|Page 7207