Magnum V8-5.7L VIN H (2005)
6. Align shock clevis bracket (2) with lower control arm (7) bushing and install mounting bolt (1) and nut (3). Do not tighten nut at this time.
7. Install hub nut (1) on end of axle half shaft (2). While a helper applies brakes to keep hub from turning, tighten hub nut to 213 Nm (157 ft. lbs.)
torque.
8. Install tire and wheel assembly (1). Tighten wheel mounting nuts (3) to 150 Nm (110 ft. lbs.) torque.
9. Lower vehicle.
10. Position vehicle on an alignment rack/drive-on lift.
NOTE: When tightening lower shock clevis mounting bolt, do not attempt rotating bolt. Bolt shaft is serrated. Turn nut only.
