Magnum SRT-8 V8-6.1L VIN 3 (2006)
2. Position the ignition switch/lock assembly (3) up in behind the instrument panel and push rearward.
3. Install the two mounting nuts to the front of the instrument panel (1).
4. From underneath the ignition switch/lock assembly, tighten the lower retaining screw (3).
5. Reach up behind the left side of the center stack and connect the ignition switch (6) and SKREEM (5) electrical connectors.
6. Install the cluster bezel.
7. Install the steering column opening cover.
8. Connect the battery negative cable.
