Magnum SRT-8 V8-6.1L VIN 3 (2006)
3. Install the two passenger airbag mounting bolts (2) to the cross car beam. Torque bolts to 11.6 N.m (103 in. lbs.).
4. Connect the passenger airbag electrical connector (3).
5. Install the two inboard mounting screws (2) to the passenger airbag just below the distribution duct (1) and to the left of the distribution housing.
Torque screws to 2.8 N.m (25 in. lbs.).
6. Install the two outboard mounting screws (1) to the passenger airbag just below the distribution duct. Torque screws to 2.8 N.m (25 in. lbs.).