Magnum SRT-8 V8-6.1L VIN 3 (2006)
4. Install the lower seat belt anchor (2) bolt (3). Torque bolt to 32 N.m (24 ft. lbs.).
REAR CENTER - WAGON
REMOVAL
1. Remove the left seat back trim cover (60% portion of the rear folding seats).
2. Disconnect the rear seat back latching cable from seat frame.
NOTE: If the seat back is not fully latched, the center seat belt will not release from the retractor.
3. Remove the one bolt (2) holding the rear center seat belt retractor.
INSTALLATION