Magnum SRT-8 V8-6.1L VIN 3 (2006)
Battery Cable: Service and Repair
Negative - Engine Compartment
BATTERY CABLES
NEGATIVE - ENGINE COMPARTMENT
REMOVAL
1. Turn the ignition switch to the Off position. Be certain that all electrical accessories are turned off.
2. Remove the spare tire cover to gain access to the battery.
3. Disconnect and isolate the battery negative cable.
4. Remove the fastener securing the battery negative cable to the right front strut tower.
5. Raise vehicle on hoist.
6. Remove the fastener securing the battery negative cable to the transmission housing.
7. One at a time, remove the battery cable retaining pushpins, fasteners and routing clips until the cable is free from the vehicle.
8. Remove the battery cable from the engine compartment.
INSTALLATION
