Magnum SRT-8 V8-6.1L VIN 3 (2006)
Battery Cable: Service and Repair
Positive - Battery to Bulkhead
BATTERY CABLES
POSITIVE - BATTERY TO BULKHEAD
REMOVAL
1. Turn the ignition switch to the Off position. Be certain that all electrical accessories are turned off.
2. Remove the spare tire cover to gain access to the battery.
3. Disconnect and isolate the battery negative cable (3).
4. Disconnect the battery positive cable (1).
5. Remove the Power Distribution Center (PDC) cover (2).
6. Remove the battery positive cable to rear PDC fastener (3).
