RAM 1500 Truck 2WD V8-4.7L VIN N (2002)
Control Arm Bushing: Service and Repair
Installation
INSTALLATION - LOWER CONTROL ARM BUSHINGS
LARGE BUSHING
NOTE: Extreme pressure lubrication must be used on the threaded portions of the tool. This will increase the longevity of the tool and insure proper
operation during the removal and installation process.
1. Install the new bushing into the lower control arm using special tools 8836-2 (receiver), 8836- 1 (driver), 8836-4 (spacer) with the bearing and the
threaded rod (8839).
SMALL BUSHING
1. Install the small bushings into the lower control arm using tools 8836-7 (driver), 8836-2 (receiver), 8836-3 (spacer) and the bearing with the
threaded rod (8839).
1. Remove the control arm from the vise.
