RAM 1500 Truck 4WD V8-5.7L (2011)
6. Remove the left front fender molding if equipped. Refer to the detailed removal procedures available in DealerConnect > TechCONNECT under:
Service Info > 23-Body > Exterior > MOLDING, Front Wheel Opening > Removal.
7. Remove the left front fender. Refer to the detailed removal procedures available in DealerConnect > TechCONNECT under: Service Info > 23-Body
> Exterior > Fender, Front > Removal.
8. All repair work will be done within the three cavities shown in (Fig. 3).
9. Remove the excess side aperture flutter foam (Fig. 4).
10. Clean all areas where seam sealer will be applied with isopropyl alcohol.
11. Apply seam sealer to the areas identified in (Fig. 5). Begin applying seam sealer at the vertical seam indicated by number one and continue applying
until you reach the horizontal seam as indicated by numbers 2 and 3 (Fig. 5). Begin applying seam sealer along the horizontal seam as indicated by
